• Header – put in header widget area

    Try Weather Defender with FREE shipping. T&Cs apply.
  • Soudal Grip ALL BLACK


    Soudal Grip ALL BLACK 290ml

    Extremely strong black adhesive



    In stock

    SKU: CPS5556 Categories: , Tags: ,


    Soudal Grip ALL adhesive BLACK

    Hybrid polymer adhesive.
    FLEXIBLE hybrid polymer grab adhesive developed by Soudal using Flexible Bonding Technology. The flexible properties of the adhesive improve the overall durability of the final bond. The high strength grab adhesive can be used inside and outside, in all weather conditions. Can be applied on both damp and humid surfaces.

    Once your Weather Defender is installed with this black adhesive, please press down to secure in place and then leave for several hours before driving over the weather stripping.

    Adhesive is included as standard with our Weather Defender kits, however, we now also offer a Clear Stixall which you can buy in addition if you want to extremely tidy finish.

    If you have additional adhesive left after your install, it can also be used on any application requiring high performance, durable sealing and bonding of joints.

    For best results use with our Weather Defender Sealant Gun.

    Top tip: Wear gloves when applying, as the adhesive is extremely strong and hard to remove.


    • Hybrid polymer grab adhesive
    • Flexible bond
    • High initial grab
    • Hybrid polymer grab adhesive


    For bonding applications when a strong and flexible bond is essential. Capable of bonding all common building materials, including: For bonding applications when a clear and flexible bond is essential. Capable of bonding all common building materials, including: wood, plywood, plasterboard, insulation board, breeze block, ceramics, brick, stone, tile, metal, concrete, plaster, PVCu and most plastics.


    Surfaces and materials should be clean and free of dust and grease. When used as adhesive: apply in beads or dots onto the material which needs to be bonded, press the material strongly onto the substrate and leave to set. When used as sealant: apply in a regular bead and smoothen immediately with Soudal Joint Finish or a soapy solution. Optimal application temperature +5°C until +25°C. Final strength will be achieved 24 hours after application.


         Technical Data


    You may also like…