Weather Defender Rubber Draught Excluder 75mm


Rubber Draught Excluder

Suitable for 75mm gaps

2.5m length can be cut to size

SKU: CPS5750 Category: Tag:


Weather Defender Aluminium Rubber Draught Excluder Strip/Seal For the Bottom of Garage Doors (Large) 2.5m Long with 75mm of Rubber

Comprising of an aluminium carrier fitted with a rubber seal, our range of Weather Defender Rubber draught strips are designed specifically for use on Up and Over and Side Hinged Garage Doors, but they can also be used on personnel doors if required.

The carriers into which the rubber seal is enclosed are supplied pre-drilled to permit fixing to the door with screws or rivets, depending on what material the door is made from. Fixings supplied.

– Seals against uneven thresholds and steps

– Stops draughts under doors

– Simple and effective rubber draught excluder

– Supplied as 2.5m length

– Can be cut to size

– Suitable for various sizes of gap 25mm-75mm (1-3 inches)

– Ideal for sliding, folding, hinged and garage doors

– Easy-to-fit with instant results

– Fixing screws supplied

– Pre-drilled adjustable fixing holes for height adjustment

Need a larger profile? We also offer rubber profiles in 50mm and 25mm and brush in 25mm50mm and 75mm widths.

Top tip: Use a small hacksaw to cut to size.

How to fix your Weather Defender Draught Seal to your door.

1. Measure bottom of door width

2. Slide the rubber out of the housing and cut the housing to size

3. Using a pair of pliers cut the rubber to the same size as the aluminium housing, ensuring the metal rubber housing is crimped as this will prevent the rubber falling out

4. To prevent the rubber insert coming out of the housing you can use glue at each end of the housing

5. Screw firmly to base of door, using the fixing included

6. And adjust as necessary

You may also like…