Weather Defender Brush Draught Excluder 50mm


Suitable for gaps up to 50mm

Brush Draught Excluder

For internal and external doors

SKU: CPS5710 Category: Tag:


Weather Defender  Aluminium Brush Draught Excluder Seal For the Bottom of Garage Doors (Medium) 2.5m Long with 50mm of Bristles

Comprising of an aluminium carrier fitted with brush seals, our range of Weather Defender Brush draught strips are designed specifically for use on Up and Over and Side Hinged Garage Doors, but they can also be used on personnel doors if required.

The carriers into which the brush seal is enclosed are supplied pre-drilled to permit fixing to the door with screws or rivets, depending on what material the door is made from. Fixings supplied.

– Seals against uneven thresholds and steps

– Stops draughts under doors

– Simple and effective brush draught excluder

– Supplied as 2.5m length

– Can be cut to size

– Ideal for sliding, folding, hinged and garage doors

– Easy-to-fit with instant results

– Fixing screws supplied

– Available in 6 different lengths

– Suitable for various sizes of gap 25mm-50mm (1-2 inches)

– Pre-drilled adjustable fixing holes for height adjustment

Need a different profile? We also offer 25mm and 75mm brush widths and we also offer rubber profiles in 25mm50mm and 75mm.

Top tip: Use a small hacksaw to cut to size.

How to fix your Weather Defender Draught Seal to your door

1. Measure bottom of door width

2. Slide the brush out of the housing and cut the housing to size

3. Using a pair of pliers cut the brush to the same size as the aluminium housing, ensuring the metal brush housing is crimped as this will prevent the brushes falling out

4. To prevent the brush insert coming out of the housing you can use glue at each end of the housing

5. Screw firmly to base of door, using the fixing included

6. And adjust as necessary

You may also like…